ED
A bit saggy & too much packaging, but works fine.
Pros:
-it works!
Cons:
-The cross-holes are offset on every second row. In my case this meant that some of the units I mounted didn't line up with the holes. Not really a problem as long as you're prepared to do some drilling. The offsets might even be a good thing if you're mounting different gear to me, who knows?
-It sags quite a lot. I mounted 3 FMR compressors (1/3 rack width each), which aren't heavy by any means, but the thing really sagged in the middle. You can fix that to a certain extent by pushing up the middle as you mount it, but it's not perfect.
-Packaging! This thing arrived swathed in polystyrene. That stuff is environmentally heinous and annoying to dispose of. I (kind of) get it with really expensive delicate gear, but a metal rack shelf? Surely in 2024 there's a better solution.
-it works!
Cons:
-The cross-holes are offset on every second row. In my case this meant that some of the units I mounted didn't line up with the holes. Not really a problem as long as you're prepared to do some drilling. The offsets might even be a good thing if you're mounting different gear to me, who knows?
-It sags quite a lot. I mounted 3 FMR compressors (1/3 rack width each), which aren't heavy by any means, but the thing really sagged in the middle. You can fix that to a certain extent by pushing up the middle as you mount it, but it's not perfect.
-Packaging! This thing arrived swathed in polystyrene. That stuff is environmentally heinous and annoying to dispose of. I (kind of) get it with really expensive delicate gear, but a metal rack shelf? Surely in 2024 there's a better solution.
0
0
Anmeld bedømmelse
J
Nice for pedals
The tray works pretty well for pedals.
I mounted a Petterson tuner facing towards the front, Sentry noise gate behind the tuner, LPB-1 boost, Joyo Dual Vision, NUX tape echo and the NUX amp academy on it with velcro, mounted an angle on it for the tuner.
The holes in the tray did assist for some neat cable management.
Got a pedal baby sitting under it with velcro between the amp and the tray, sits stable as a rock and also gave ne enough space to put an AKG wireless mini receiver beside the amp.
Only thing I couldn’t fit in was my DC10 power supply, ended up mounting it at the top of the rack case.
I mounted a Petterson tuner facing towards the front, Sentry noise gate behind the tuner, LPB-1 boost, Joyo Dual Vision, NUX tape echo and the NUX amp academy on it with velcro, mounted an angle on it for the tuner.
The holes in the tray did assist for some neat cable management.
Got a pedal baby sitting under it with velcro between the amp and the tray, sits stable as a rock and also gave ne enough space to put an AKG wireless mini receiver beside the amp.
Only thing I couldn’t fit in was my DC10 power supply, ended up mounting it at the top of the rack case.
0
1
Anmeld bedømmelse
M
Well made rack tray
Not so easy to find short depth rack trays that one needs half-rack radios, processors and digital mixers. A short rack tray allows you to have a smaller rack case and cut down on space needed in the van.
1
0
Anmeld bedømmelse