iConnectivity mioXL

I was looking for a device that would route all my MIDI connections in the studio and I almost bought a vintage 19" rack device (EDIROL UM-880) when I found out about this product. (ofc no warranty for the vintage gear and price was 80% of this unit)
I have already used all the connections (USB, DAW, MIDI) and everything works as expected. The setup is straightforward although you need to use a computer. However you can save routing presets and then use it without a computer which is one of the advantages over other similar products that only work with computer connected. The build quality is perfect, design looks really good and feels like using high-end device. The software is well made, fast, easy to use. For someone the price might be too high, but you really get what you pay for. You can also get one of the smaller versions if you have smaller setup. Overall this product is great and I am perfectly happy with it. I would recommend it to anyone who uses a lot of MIDI devices as this is going to make your life so much easier.

The device itself seems great, but there are several other caveats.

The control software (Auracle) does not scale to a device with this many ports at all, for complicated configurations beware of carpal tunnel syndrome from all the clicking. Also beware that while the previous generation SysEx control commands were thoroughly documented, this new X-series uses a completely different protocol which is NOT documented and queries about this have been met with deadly silence. So you'll be stuck with Auracle, and you can forget about scripting and automation. Also, overall documentation is almost non-existent (videos? come on...)

I use it at the moment in Win7/x64 and it works.
So far I have tried to connect unit via USB as well LAN - both connections worked. I was able to configure what I wanted (several synths via DIN ports, midi controller, DAW in PC) so I like it.

Auracle software is a bit unstable on Win7. It crashes quite frequently however mostly gives enough time to setup the unit. Maybe it is because of Win7 which is stated as unsupported platform but it is hard to say.
Hopefully there will be some updates to the software in the future. If it crashes a check in windows task manager is recommended to kill failed application or it just consumes resources.

Documentation seems to be missing. There are some tutorial videos which cover relatively a lot but I recommend to get mio10 manual with a block diagram which helped me to see the flow of filtering/routing/remapping & their precedence.

I am not sure about the price jump comparing to mio10.

This is an amazingly simple yet complicate box basically to solve all your MIDI problems. I had problems like mering MIDI and multi-client issues (using editor VSTs for external synths while driving them via an USAMO box etc.) and this can solve it all. It works "out of the box" as a normal MIDI in/out device, but you can route anything to anywhere so this solves all merging and diverging issues. There is good driver for my Windows and the routing software worked super well.

It of course fits into your rack and looking pretty good as well.

All in all an excellent MIDI solution and probably the last one you ever need

Solid interface that just works without any problem. It takes a little bit of time to get to know the units and to set up your presets, but once you have set up everything you will have a solid interface that does not need any more attention and always works. I did not experience any bugs or problems and all my gear is in sync with my computer. I add clock with a midronome and distribute it to all Midi outs. Finally my studio is synced and everything is playing along together without any latency or problems. The unit itself is kind of pretty and it has a good feel to it. If I would mention a downside that would be that the USB on the front panel is only for USB midi and not a USB host for different USB devices. Also you cannot name individual ins and outs from the same port, they share names. I am very happy with this unit and I recommend this one definitely.

WARNING !!! Nowhere in the description of the product neither in the videos I watched on youtube says it is not compatible with Push 2, Akai Apc 40, Novation SL Mkiii, Maschine, and many others. I could never imagine that could be the case, so when I received it through the case away. Now I have a problem returning it. Thoman should warn about that in the description. According to what I read now after buying most MIDI devices with USB ports follow the standard protocol for USB-MIDI - we call this being “class compliant”. However, some more advanced MIDI devices have extra features not covered in the MIDI specification and are thus not fully class-compliant. Devices like these will not operate correctly when attached to an iConnectivity USB-MIDI Host port. See the list of non-compatible controllers and synths here. https://iconnectivity.supportbee.io/53-iconnectivity-knowledgebase/534-midi/837-is-my-midi-device-compatible-with-the-iconnectivity-usb-midi-host-port

My studio has a mix of MIDI DIN devices and a few USB class compliant devices: synths, drum machines, effects units.
I now have 3 mioXL devices which enable me to route anything to anything with relative ease. The RTP MIDI solution is a game changer for me as it meant I could get rid of a USB snake cable and manage everything over the network. Being able to use a software editor for a synth (like the Sequential OB6) over USB connection while simultaneously connecting it via DIN MIDI to my sequencer is great. Downsides? The Auracle software used to program the mioXL needs a little consideration when using it and the documentation is non-existent so you'll need member accounts on forums to get guidance when you get stuck. Solid build and no other solution out there that compares with this.