Superlux MA-90

49

Microphone Rail

  • Professional track for 2 microphones (5/8 ")
  • Each microphone holder can be adjusted between 10 mm and 200 mm as well as up to 45 degrees
  • 20 Lockable positions
  • Screwable onto tripods with 3/8 " threaded connection
  • Length: 620 mm
  • Weight: 640 g
  • Matching adapter from 5/8 "to 3/8": Art. 104949 (not included)
Fås siden September 2010
Artikelnummer 249405
salgsenhed 1 stk
444 kr
Inkl. moms. Obs! Yderligere fragtomkostninger 60 kr
på lager
på lager

Produktet er på lager og klar til afsendelse.

Information om forsendelse
Forventet levering mellem torsdag, 4.04. og fredag, 5.04.
1

49 Kundebedømmelser

4.1 / 5

Du skal være logget på, for at kunne vurdere et produkt.

BemærkVi tillader kun vores kunder, at afgive en vurdering af det udstyr de har købt hos os. Vi modtager ikke anmeldelser eller vurderinger af produkter fra tredje kilde.

Efter login finder du også i kundencenter under "vurderinger af produkt" alle artikler, som du kan afgive en vurdering af.

forarbejdning

29 Anmeldelser

google translate gb
Der opstod en fejl. Prøv igen senere.
T
Does the job but poor construction
TrEr 21.02.2015
Like the title says, it does the job but the build quality isn't the best. The fastening knobs are of poor quality. I feel like I have to tighten them so much to be secure that somewhere down the line the threads are bound to strip. Also, it's not very user friendly. The "engraved detented positions" can simply be ignored. The engraved scale is just sliding around and almost impossible to use.

The price is low compared to similar (and better!) products. I guess you get what you pay for. For basic stereo setups where precise angles aren't critical I guess it is ok. At least until it breaks... time will show how the build quality holds up.

Ok for a home/project studio but certainly not a professional tools.
forarbejdning
2
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
M
Excellent for stereo recordings
Marco4192 13.05.2014
Excellent microphone bar for stereo recordings. It's really amazing. Build quality looks like K&M, there is a lot of possibility in movement, and any microphone fits very well. I ordered this in combination with the Superlux MS200, but I was not happy of the MS200 and I returned it back (replaced with a much lighter Manfrotto). But I have to say that this stereo bar fits all my needs. Very nice that each step is lockable (the scale you see are not centimeters, but steps) and also the horizontal angle of the microphone has 'steps' of 15 degrees. Very useful when you want to setup a NOS system (90 degrees of angle). I do it in no brainer, very quickly. You can also hand it with wires, it has that option too.
The cons are that it's a bit heavy, so you need a good stand.
Apart from that, it's an excellent product.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
A
Sturdy, large stereo bar
Anonym 20.12.2015
While this stereo bar comes with nice gradients and angles for various near-coincident techniques I don't use any of that. I use this for AB or Blumleins with big heavy mics like ribbons and LDC's and it works. Great. And it's cheap.

Anyone interested in doing location recording or stereo drum mic'ing that goes beyond the "two pencil mics above the cymbals" paradigm should pick one up. This plus a decent, sturdy mic stand and you're set. They go from taking 30 minutes of wiggling two stands about 5 minutes.

Downsides? the little indents to space the two points are a little far apart. You can make up for by jiggling your mic in its mic stand. For vertical setups like Blumleins where the capsules are already offset, it's not much of a big deal anyway.
forarbejdning
1
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
B
Made well enough but a weird scale and only suitable for A-B
BernieW 15.12.2022
The two mounts on the ends of this bar are drilled so you can hang it from wires or cords, with the mics hanging down. The only other available mounts like this I've seen cost much more. The manufacturing is fine, the 2 mounting points slide and lock stably. Great cheap way to hang mics above a choir, orchestra etc
But! The scale on the side is not in centimeters, or half inches or any unit you've heard of. Measure from number 1 to 20 and it turns out to be 24cm. Plus, the "1" markings on each side are 7cm apart. From the scale on the side you have no idea what the spacing actually is, so you'd better bring something to measure with!

Also there is no spacer to raise one mic above the other for X-Y, ORTF etc, so you'd have to aim the mics slightly up and down for these. The angle indents are at 15 degree steps so there's no setting for 110 degrees for ORTF, and they only go to 45 degrees max anyway. You could angle the mic clips on the mounts but it means there's no support for ORTF on this mount at all.

If you just want to use A-B it works well enough (bring a ruler!) and it does have hanging points, but it has these limitations. I prefer the T-Bone StereoBar 1 Pro, it's just as wide, has a cm scale, a tilting joint with scale, 4 mounting points that go to any angle and you can still hang it inverted by threading the wires through the ends. A much better design for just a little more money
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse