Flyht Pro Rack Tray 19" 1U short Mount

28

Universal rack tray with cross holes

  • Suitable for almost all 19" and 9.5" units
  • Base area (W x D): 440 x 190 mm
  • Design: 19" / 1 U
Myynnissä vuodesta Helmikuu 2021
Tuotenumero 503041
Myyntierä 1 kappaletta
22 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu lähetyspäivä Perjantai, 24.05. mennessä
1

28 Asiakkaiden arviot

4.8 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Vakaus

Työnjälki

21 Arvostelut

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
ED
A bit saggy & too much packaging, but works fine.
Ellery Daines Music Production 19.05.2024
Pros:
-it works!
Cons:
-The cross-holes are offset on every second row. In my case this meant that some of the units I mounted didn't line up with the holes. Not really a problem as long as you're prepared to do some drilling. The offsets might even be a good thing if you're mounting different gear to me, who knows?
-It sags quite a lot. I mounted 3 FMR compressors (1/3 rack width each), which aren't heavy by any means, but the thing really sagged in the middle. You can fix that to a certain extent by pushing up the middle as you mount it, but it's not perfect.
-Packaging! This thing arrived swathed in polystyrene. That stuff is environmentally heinous and annoying to dispose of. I (kind of) get it with really expensive delicate gear, but a metal rack shelf? Surely in 2024 there's a better solution.
Työnjälki
Vakaus
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
J
Nice for pedals
Jørg 08.03.2023
The tray works pretty well for pedals.
I mounted a Petterson tuner facing towards the front, Sentry noise gate behind the tuner, LPB-1 boost, Joyo Dual Vision, NUX tape echo and the NUX amp academy on it with velcro, mounted an angle on it for the tuner.
The holes in the tray did assist for some neat cable management.
Got a pedal baby sitting under it with velcro between the amp and the tray, sits stable as a rock and also gave ne enough space to put an AKG wireless mini receiver beside the amp.
Only thing I couldn’t fit in was my DC10 power supply, ended up mounting it at the top of the rack case.
Työnjälki
Vakaus
0
1
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
M
Well made rack tray
Mombasaflash 27.09.2021
Not so easy to find short depth rack trays that one needs half-rack radios, processors and digital mixers. A short rack tray allows you to have a smaller rack case and cut down on space needed in the van.
Työnjälki
Vakaus
1
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate de
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
W
Stabil, praktikabel.
Wolferl62 08.03.2021
Ich musste ein kleines RME Interface rackfähig machen und da es keine Möglichkeit der Verschraubung gab kam nur eine Befestigung mit Kabelbinder in Frage.
Genau dafür eignet sich diese Rackwanne durch ihre Schlitze sehr gut.
Gut verarbeitet und dickes Blech das sich nicht verwindet.
Työnjälki
Vakaus
0
0
Raportoi ongelmasta

Raportoi ongelmasta