V
Must have for D-type connectors.
Didn't know first that these existed and mounted my D-type XLR, jacks, USB, ethernet... -connectors with nuts and it was a hassle. These snap on the connector and stay put while you drive the bolts in. These make installation a breeze and I recommend some threadlocker (eg. Blue Loctite) for more permanent installations. Tip: get some M3 hex-bolts or torx for easier installation using cordless driver. Philips/pozidrive is ok, but heads will strip easily especially on these small bolts. Also hex or torx gives a nice finished look.
0
0
Raportoi ongelmasta
F
Works well!
If you don?t want to buy or use M3 nuts with your D-type connectors, this is the solution. Looks good too (if you see back of your rack.).
0
0
Raportoi ongelmasta
AS
Tekee sen mitä pitää
Toimii d-liittimien kiinnitykseen paneeliin oivasti, minkä tuote lupaakin.
0
0
Raportoi ongelmasta
