A
Great power plug in its price range!
The finish of the plastic is a bit rough as can be expected at this price, but all the parts still fit on each other perfectly. The important thing is that the contacts are of good quality and the screws accept proper tightening torque without thread damage. This is probably the reason this plug seems to be VDE certified, which is a good sign.
The screws in the contacts press on the wires directly, so my recommendation is to use terminating sleeves on stranded wires to make a good contact, especially if there is the possibilty of higher current draw. (If you're not experienced in the field of electrics, keep in mind that poorly made contacts often will heat up at higher loads, and in the worst case they may catch fire!)
The screws on the strain relief inside the plug are partially threaded which enables proper clamping on the cable. Also the screw on the cover is partially threaded to seat the cover properly. The cover also locks in the contacts which can be pulled out for (dis)assembly if needed.
Toolingwise, all the screw heads are combos of Pozi-Driv PZ1 and flat-head, PZ1 being the universal fit for them all.
The screws in the contacts press on the wires directly, so my recommendation is to use terminating sleeves on stranded wires to make a good contact, especially if there is the possibilty of higher current draw. (If you're not experienced in the field of electrics, keep in mind that poorly made contacts often will heat up at higher loads, and in the worst case they may catch fire!)
The screws on the strain relief inside the plug are partially threaded which enables proper clamping on the cable. Also the screw on the cover is partially threaded to seat the cover properly. The cover also locks in the contacts which can be pulled out for (dis)assembly if needed.
Toolingwise, all the screw heads are combos of Pozi-Driv PZ1 and flat-head, PZ1 being the universal fit for them all.
1
0
Report
Dc
Solid
Havent used them yet but compared to some others i bought from my local electrics store,, they look very well made at a quite affordable price point.
0
0
Report
EF
Does the job
Great connector. Just to note it fits 5mm cable
1
0
Report
M
Well made, slightly awkward terminations
These are well made, but like most of the IEC plugs I've bought of late the terminations seem a little awkward (unlike the older type where you could add ferule crimps.
However these are as good as any others on the market and well priced.
However these are as good as any others on the market and well priced.
0
0
Report
PN
Aceptable quality at a low cost
Not a lot to say really, they're easy to use unlike many of the cheap offerings on the market. The MUCH more expensive plugs are easier to wire up, but this comes at a price I choose not to pay. If you're reasonably adept at electrical wiring you shouldn't have any problems with these.
0
0
Report
H
VERY RUBUST
Combined use with 794 for Furman devices. Very safe and easy to install.
0
0
Report
IG
Great and reable plug
Easy to assemble, good quality plastic, all you need is just one screwdriver and little patience and your power cable is ready to go. I am made cables for Furman power conditioner to upgrade old cables and they fit PERFECT!
In hands is great overall feel and strength, all in all very well made connector. When i need more i will by this one again.
In hands is great overall feel and strength, all in all very well made connector. When i need more i will by this one again.
1
0
Report
VP
Good connector for the money, no problems there.
I use it for a small load, as well as for connecting active speakers. Everything works great everywhere. I recommend!
0
0
Report
TP
Kwaliteitsvolle plug
Alles in orde, goede kwaliteit en makkelijk aan te sluiten
0
0
Report
h
a good product
everything that needs to work, everything is thought out, good performance, nothing more and nothing less - everything that is needed for installation and use
0
0
Report