M
Great quality CTS pots
To replace the wire harness of an old '96 Squier Standard strat.
I big issue (maybe due to my guitar), but the 5 way selector is higher than most standard Squier selectors. This causes it to touch the wood and in my case the copper shielding causing it to short out.
So to remedy this I took a chisel and made that small area 5 mm deeper, this together with some thin insulation material there solved the issue.
I bet I am not the only one who has had this issue.
The sound is great, no issue and pots are very good quality.
Bit expensive I think, but worth it
I big issue (maybe due to my guitar), but the 5 way selector is higher than most standard Squier selectors. This causes it to touch the wood and in my case the copper shielding causing it to short out.
So to remedy this I took a chisel and made that small area 5 mm deeper, this together with some thin insulation material there solved the issue.
I bet I am not the only one who has had this issue.
The sound is great, no issue and pots are very good quality.
Bit expensive I think, but worth it
0
0
Evaluatie melden
