K
Every Roadie & busy studio needs to get these!
This is one of the coolest things I ever bought. (I'm easy pleased...LOL!) But seriously. I bought these because I was fed up with all the screwing on & off of mics in the studio & at gigs. I thought they would speed up the process, boy was I right.
First, it comes in 2 parts. The quality is extremely rugged and solid and the matt-black finish will fit with any stand. First part has a 3/8 internal thread and fits on the end of the mic stand. It has a retractable spring-loaded part in the middle. This is the locking mechanism.
The second part, a nipple (LOL! Yep I said nipple), Has a 3/8 external thread and fits into the socket on the microphone clip. Once both are fitted, all you do is retract the spring part on the stand, place the mic clip against it and release. You may need to twist ever so slightly to get it to lock into place. You can buy this item on its own (MS QC 1 TB) so you can fit one to every mic clip you have. Unfortunately you cannot buy the main chassis on it's own. It would be helpful if you could.
This thing is easy as hell to use. I laughed when I opened the box, because there is an instruction leaflet. If you need to read this, you should probably be considering another career. Time will only tell if the spring lock mechanism stands up to rigorous use & abuse. But I don't care. I'm gonna buy another 4 or 5 of these & keep a couple in the drawer.
They are fantastic value at the price & the nipples are cheap as chips!
EVERYBODY, buy these. You will not regret it!!!
First, it comes in 2 parts. The quality is extremely rugged and solid and the matt-black finish will fit with any stand. First part has a 3/8 internal thread and fits on the end of the mic stand. It has a retractable spring-loaded part in the middle. This is the locking mechanism.
The second part, a nipple (LOL! Yep I said nipple), Has a 3/8 external thread and fits into the socket on the microphone clip. Once both are fitted, all you do is retract the spring part on the stand, place the mic clip against it and release. You may need to twist ever so slightly to get it to lock into place. You can buy this item on its own (MS QC 1 TB) so you can fit one to every mic clip you have. Unfortunately you cannot buy the main chassis on it's own. It would be helpful if you could.
This thing is easy as hell to use. I laughed when I opened the box, because there is an instruction leaflet. If you need to read this, you should probably be considering another career. Time will only tell if the spring lock mechanism stands up to rigorous use & abuse. But I don't care. I'm gonna buy another 4 or 5 of these & keep a couple in the drawer.
They are fantastic value at the price & the nipples are cheap as chips!
EVERYBODY, buy these. You will not regret it!!!
2
0
Zgłoś nadużycie
E
Really saves my time!!!!!!!
I have this on all my 3rd party mic clamps! Really saves time keeping on tour!
0
0
Zgłoś nadużycie
M
Great if you switch microphones a lot
I use these in my home studio to simplify mic changes and experimentation - it beats having to screw off & on various mic mounts if you want to swap out mics. Construction is top-notch and it's easy to use. About the only down side is you need to buy the a coupler (sold separately; this is the base for the stand) for each mount in order to get the most out of the system.
0
0
Zgłoś nadużycie
B
Fantastic little gizmos!
Bought 3 of these for my stage set up. Use one to attach boom to upright and the others to attach two different mics to boom. The whole lot clicks together in seconds - no more endless screwing or frustration trying to get the boom and upright threads to mate! As a bonus I can swap mics on the boom so fast it can be done seamlessly between songs. Extremely well made too. Very happy!
0
0
Zgłoś nadużycie
B
The best quick-release mic adapter yet
The industry standard until now has been a bayonet-type system, this is MUCH better! Quick and easier to mount and disconnect, sometimes there isn't room to conveniently twist for the bayonet-type. All the Gravity products I've owned have been solid and well-made, this one is too. This one is even good enough to mount more than just a single mic, you could attach a stereo bar or shock mount, even a small boom and it will hold it stably and safely and you don't need to twist it onto a thread. I bought four of these with my last Thomann order because they're also very affordable and I'm very glad I did, a great benefit to my live mic kit.
0
0
Zgłoś nadużycie
j
The Gravity MS QC 1B saves the day!
The Gravity MS QC 1B mic mount allows me to pop on and off mics in mid session before the client or producer even has a chance to ask if I'm ready. It embodies the Bruce Lee adage "Be like water" and flow seamlessly from one session into another, from one take to another, with a different set up ready-to-go!
0
0
Zgłoś nadużycie
c
Excellent
Very good implementation of a very good idea. Nice finish, snug fit and if you buy a few extra MS QC 1 TB adapters, you can switch multiple mics to the same base. Makes life a lot easier!
0
0
Zgłoś nadużycie
A
It works. Very handy
The applications of this speak for itself.
Usable anywhere where a quick coupler of any mic. with any mic. stand is concerned..
The lock mechanism feels secure. It clicks tight in just one way.
Usable anywhere where a quick coupler of any mic. with any mic. stand is concerned..
The lock mechanism feels secure. It clicks tight in just one way.
0
0
Zgłoś nadużycie
B
Ein bisschen schwer, als erwartet,
sonst ganz in Ordnung, mit passendem Preis.
0
0
Zgłoś nadużycie
A
They don't work
They just don't work. The two parts won't re-couple, so they are useless. Out of three different 'Gravity' products that I have bought, only one of them is any good. I'll give them a miss in future.
0
0
Zgłoś nadużycie
