Harley Benton Solder-Free Patch Cable KIT

583

Kit for solderless patch cables

  • Consisting of 3 metres of cable and 10 angled plugs
  • Solder-free plug for precise mounting in seconds to the exact lengths required, for an individual pedalboard cabling
  • Excellent signal flow and low capacity for maximum transparency
  • 7x 0.15 mm copper conductor
  • Semi-conducting PVC and a braided copper / aluminium shield protect effectively against interference
  • Extra slim gold plated metal plug
  • Incl. cable cutter, screwdriver and assembly instructions
Produkt dostępny od Listopad 2017
Numer artykułu 410584
Jednostka sprzedaży 1 szt.
Colour Red
Connector 1 Jack 6,3mm TS male
Connector 2 Jack 6,3mm TS male
Length 3 m
Connector from 6,3mm TS Jack
Plug out Jack 6,3mm TS male
Pokaż więcej
75 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 24.05.
1

583 Oceny klientów

4.3 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

422 Opinie

K
Świetny zestaw
KubaMakuch 31.01.2022
kable bardzo łatwe w montażu, szybko można dostosować długość między efektami, końcówki dobrej jakości, wąskie więc dobrze się mieszczą jedna obok drugiej, polecam
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

JS
Make your pedalboard clean again!
Jakub Soukup 06.08.2020
I've finally made my pedalboard properli wired. It is eay to make connectors, just try them with a pedal tuner before you zip-tie them to the board.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

p
Ciekawa alternatywa
piotrekle 16.10.2019
Ciekawa alternatywa dla patchowych kabli
wykończenie
0
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
VV
2 stars for the number of live shows that these cables worked on. Great for home, not so great for life on the road!
Vlad Vartosu 22.09.2021
I bought 4 of these kits for my entire pedalboard, approx. 19 pedals. I wanted to rewire and bring some cleanliness to it, which it did. The jacks and cables are fairly discreet and can bend to whatever shape you please, thus making a busy board look a lot tidier.

However, quality-wise, I am waiting and hoping that Harley Benton will revise this kit and make it a lot more reliable. Please bear in mind, this is not a good solution if you are a touring musician, and your show depends on your pedalboard. The connection of these cables is held together by a screw, and if you add that to a board that sits in a back of a car and bus, gets pulled to the stage in and out night after night, this system is doomed to fail in no time.

I am speaking out of personal experience, the cables failed me after only two live shows on the road.

However, I would recommend this kit to anyone who wants to build a board at home, wants full control of customization, and doesn't want to spend a fortune on patch cables.

I thought they were going to be the ideal solution for my pedalboard, but I will go back to soldered connections.

Thank you nonetheless, it was a good lesson learned.
wykończenie
8
0
Zgłoś nadużycie

Zgłoś nadużycie