JTS MA-123

64

Switchable attenuator for microphones

  • -10 dB, -20 dB and -30 dB switchable
  • Suitable for dynamic microphones and condenser microphones
  • XLR in / out
  • Frequency range: 22 - 20,000 Hz
  • Dimensions: 21 x 113 mm
  • Robust metal housing
Fås siden April 2018
Artikelnummer 436200
salgsenhed 1 stk
189 kr
Inkl. moms. Obs! Yderligere fragtomkostninger 60 kr
på lager
på lager

Produktet er på lager og klar til afsendelse.

Information om forsendelse
Forventet levering mellem tirsdag, 28.05. og onsdag, 29.05.
1

64 Kundebedømmelser

4.7 / 5

Du skal være logget på, for at kunne vurdere et produkt.

BemærkVi tillader kun vores kunder, at afgive en vurdering af det udstyr de har købt hos os. Vi modtager ikke anmeldelser eller vurderinger af produkter fra tredje kilde.

Efter login finder du også i kundencenter under "vurderinger af produkt" alle artikler, som du kan afgive en vurdering af.

forarbejdning

40 Anmeldelser

Fungerer bare godt
Fridi Øster 17.12.2022
En billig løsning, og fungerer super godt.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
r
Recommended with Tannoy 5 Gold monitors and Babyface Pro
roccapl 28.11.2020
I had the problem that the output of my RME Babyface Pro (the old model) has a fixed output that drives the Tannoy Gold 5 monitors too hot.
The result of this is that the main output of the sound card had to stay at -40dB, lowering the resolution of the audio and pumping the self noise. In the rme forums ("Level mismatch solutions - fixed and variable attenuators"), they suggested this product and I admit that they work perfectly to attenuate the sound card output so that I can turn my main output back to 0dB.
forarbejdning
5
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
AD
The cheapest and gets the job done
Alex Djuran 31.03.2021
I bought a few of these for some loud sources I'm dealing with in my studio such as my subkick, LDC overheads, SDC's on close mic'd drums etc. The sources are very hot, so I needed some pads to not clip my mics in digital and this little thing caught my eye.

It's way cheaper than most of the competition and it's pretty versitile in offering you 3 steps of padding. Overall, great product!
forarbejdning
1
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
ED
Great sound, ok build
Ellery Daines Music Production 19.05.2024
Audio-quality-wise my pair of these both work great (at the time of purchase, anyway). I'm using them to bring down really hot line-level signals before they hit my converters, and there's no unwanted artefacts or nasty business.

The build quality is where you save the money compared to Shure etc. I've used the Shure inline pad a lot and it's definitely more rugged than this one. The casing here is plastic, not metal, and feels like it might not survive a misplaced kick or mic being dropped on it etc. Fine for situations like mine where it stays wired up in the same place all the time, out of trouble. Maybe not so fine for getting thrown around at a live venue etc.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse