Bare Knuckle 280K Stand. Shaft Split Pot

7

Potenciómetro para guitarra y bajo

  • Eje estándar
  • Curva de resistencia: Logarítmica (Custom Audio Taper)
  • Fabricado por CTS especialmente para Bare Knuckle
  • Comportamiento de giro sedoso y tolerancia de +/- 10%
  • Resistencia: 280 kOhm
  • Eje: Estriado
  • Diámetro de caña: 6 mm
  • Longitud total de caña: 19 mm
  • Longitud de rosca: 10 mm
  • Diámetro de rosca: 10 mm
  • Diámetro de la carcasa: 24 mm
  • Incluye arandela, arandela de seguridad y tuerca
  • Made in USA
Disponible desde Diciembre 2020
número de artículo 507613
Precio por 1 Unidad(es)
Construcción Eje estriado
Curva característica Logarítmico
Longitud de la rosca 9,0 mm
Potenciómetro en tándem No
Push/Push No
Sin soldadura No
Tipo de eje Estriado
14,80 €
IVA incluido. 15 € de gastos de envío adicionales
En stock
En stock

Este producto está en stock y puede ser enviado inmediatamente.

Información sobre envíos
Entrega estimada entre Lunes, 10.06. y Miércoles, 12.06.
1

7 Valoraciones de los clientes

4.6 / 5

Para poder evaluar un producto deber estar registrado en su centro de clientes.

Importante: Con fin de evitar evaluaciones en base a rumores o mitos populares, solo permitimos en nuestro website evaluaciones por clientes que hayan comprado el producto con nosotros.

Tras de acceder a su centro de clientes encuentra en Centro de clientes "Evaluar productos" todos los artículos que puede evaluar.

Fabricación

7 Reseñas

J
Bare knuckle 280k pot
JoseSerolf 10.01.2022
Muy buena calidad, suavidad de giro y de fácil soldado. Eje roscado de 10mm con rosca americana.
Fabricación
0
0
Reportar evaluación

Reportar evaluación

google translate gb
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
T
Good quality CTS pots that measured SPOT ON 280k.
TCSMD 10.10.2021
I got these for a P90 equipped guitar. I find 250k a bit low for P90s and 500k is way too high for my taste. I prefer audio taper so the linear 300k Gibson pots wasn't an option for me and I can't seem to find audio taper 300k pots anywhere.

These 280k pots seemed interesting. I ordered two and I hoped that with a bit of luck they would be slightly higher than 280k or at least not lower.

As it turned out one measured exactly 280k and the other one measured 281k. I had hoped they would be slightly higher but I can't really complain when they were EXACTLY as specified.

Of course I can't really say much about tolerance from such a small number of specimens but it looks pretty tight.

The quality of the pots is just like standard CTS pots (which means they're very good!).

Highly recommended if you want audio taper with slightly higher resistance than standard 250k pots.
Fabricación
1
1
Reportar evaluación

Reportar evaluación

google translate de
Lamentablemente hubo un error. Por favor, inténtelo de nuevo más tarde.
P
Für ein wenig mehr Höhen....
Patrick396 26.07.2021
Ich habe dieses Poti eingebaut um ein etwas älteres kratzendes zu ersetzten und wegen dem etwas höheren 280-ohm Wert ein wenig mehr "frische" in meine Strat zu bekommen. Leichtgängig ist es...aber leider hielt es nicht so lange und fing auch nach ein paar Wochen an zu "kunspern". Da ich nichts von "kontaktspray Reparaturen" halte (in der Regel hält das auch nicht lange und wird nur schlimmer..) musste ich es wieder ausbauen und habe jetzt teure Dunlop 250 Pots drinnen, die ewig halten sollen....das tun sie auch. Leider für Thomann diese Poti nicht....
Fabricación
0
0
Reportar evaluación

Reportar evaluación