JTS MA-123

64

Schakelbare attenuator voor microfoons

  • -10 dB, -20 dB en -30 dB schakelbaar
  • Voor dynamische microfoons en condensator-microfoons
  • XLR in/out
  • Frequentie bereik: 22 - 20.000 Hz
  • Afmetingen: 21 x 113 mm
  • Robuuste metalen behuizing
Leverbaar sinds April 2018
artikelnummer 436200
verkoopseenheid 1 stuk
€ 24,90
Incl. btw plus € 5,90 verzending
direct leverbaar
direct leverbaar

Dit product is op voorraad en kan direct verzonden worden.

Informatie over de verzending
Levering ongeveer tussen Maandag, 27.05. en Dinsdag, 28.05.
1

64 Klantenbeoordelingen

4.7 / 5

U moet ingelogd zijn om producten te evalueren.

Note: Om te voorkomen dat evaluaties gebaseerd zijn op roddel, geruchten of heimelijke advertentie staan wij op onze website alleen evaluaties toe van daadwerkelijke gebruikers die het geevalueerde product bij ons gekocht hebben.

Na inloggen vindt u alle producten die u kunt evalueren ook onder “Product evalueren” in uw klantencentrum.

afwerking

40 Recensies

G
Output niveau van vocal-effect was te hoog voor mixer
Gitarist/zanger 24.09.2020
Ik gebruik de jts ma-123 Om het uitgangssignaal van een vocal-effect te verlagen omdat onze mixer ging vervormen wanneer de zangeres harder ging zingen.
Het is een simpel apparaat en doet wat je ervan verwacht.
afwerking
1
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
r
Recommended with Tannoy 5 Gold monitors and Babyface Pro
roccapl 28.11.2020
I had the problem that the output of my RME Babyface Pro (the old model) has a fixed output that drives the Tannoy Gold 5 monitors too hot.
The result of this is that the main output of the sound card had to stay at -40dB, lowering the resolution of the audio and pumping the self noise. In the rme forums ("Level mismatch solutions - fixed and variable attenuators"), they suggested this product and I admit that they work perfectly to attenuate the sound card output so that I can turn my main output back to 0dB.
afwerking
5
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
AD
The cheapest and gets the job done
Alex Djuran 31.03.2021
I bought a few of these for some loud sources I'm dealing with in my studio such as my subkick, LDC overheads, SDC's on close mic'd drums etc. The sources are very hot, so I needed some pads to not clip my mics in digital and this little thing caught my eye.

It's way cheaper than most of the competition and it's pretty versitile in offering you 3 steps of padding. Overall, great product!
afwerking
1
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
ED
Great sound, ok build
Ellery Daines Music Production 19.05.2024
Audio-quality-wise my pair of these both work great (at the time of purchase, anyway). I'm using them to bring down really hot line-level signals before they hit my converters, and there's no unwanted artefacts or nasty business.

The build quality is where you save the money compared to Shure etc. I've used the Shure inline pad a lot and it's definitely more rugged than this one. The casing here is plastic, not metal, and feels like it might not survive a misplaced kick or mic being dropped on it etc. Fine for situations like mine where it stays wired up in the same place all the time, out of trouble. Maybe not so fine for getting thrown around at a live venue etc.
afwerking
0
0
Evaluatie melden

Evaluatie melden