JTS MA-123

65

Switchable attenuator for microphones

  • -10 dB, -20 dB and -30 dB switchable
  • Suitable for dynamic microphones and condenser microphones
  • XLR in / out
  • Frequency range: 22 - 20,000 Hz
  • Dimensions: 21 x 113 mm
  • Robust metal housing
Tillgänglig sedan April 2018
Artikelnummer 436200
försäljningsenhet 1 Styck
295 kr
inklusive moms, 99 kr frakt tillkommer
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
Beräknat utskeppningsdatum till Måndag, 3.06.
1

65 Kundbetyg

4.7 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

hantverkskvalitet

41 Recensioner

MH
Bra grej
Martin Hä 28.01.2023
Jag håller mig till -10dB dämpning, och då låter denna bra
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
r
Recommended with Tannoy 5 Gold monitors and Babyface Pro
roccapl 28.11.2020
I had the problem that the output of my RME Babyface Pro (the old model) has a fixed output that drives the Tannoy Gold 5 monitors too hot.
The result of this is that the main output of the sound card had to stay at -40dB, lowering the resolution of the audio and pumping the self noise. In the rme forums ("Level mismatch solutions - fixed and variable attenuators"), they suggested this product and I admit that they work perfectly to attenuate the sound card output so that I can turn my main output back to 0dB.
hantverkskvalitet
5
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
AD
The cheapest and gets the job done
Alex Djuran 31.03.2021
I bought a few of these for some loud sources I'm dealing with in my studio such as my subkick, LDC overheads, SDC's on close mic'd drums etc. The sources are very hot, so I needed some pads to not clip my mics in digital and this little thing caught my eye.

It's way cheaper than most of the competition and it's pretty versitile in offering you 3 steps of padding. Overall, great product!
hantverkskvalitet
1
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
ED
Great sound, ok build
Ellery Daines Music Production 19.05.2024
Audio-quality-wise my pair of these both work great (at the time of purchase, anyway). I'm using them to bring down really hot line-level signals before they hit my converters, and there's no unwanted artefacts or nasty business.

The build quality is where you save the money compared to Shure etc. I've used the Shure inline pad a lot and it's definitely more rugged than this one. The casing here is plastic, not metal, and feels like it might not survive a misplaced kick or mic being dropped on it etc. Fine for situations like mine where it stays wired up in the same place all the time, out of trouble. Maybe not so fine for getting thrown around at a live venue etc.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension